fog light wiring
 

i have a 1997 cherokee se and i want to install factory fog lights. there is a blank spot for the switch and i think i found only 1 plug for the passenger side light. i need to know if the vehicle is already prewired for them or not. can i just buy a switch and the fog lights and plug them in? any help id much appreciated!!! thanks!

I am looking to do the same thing with my '98 XJ. You can get the fogs/switch/wiring kit from a Chrysler dealership, but it's pretty expensive. Or you can pick up the factory fogs from most body shops. There is a OEM switch made by Standard Motor Products/Bluestreak. From what I understand the mounting equipment is there below the bumper. My friend was going to wire mine into the same circuit as the parking lights, but I don't really want to do that. But to answer your question, the wiring is not there from the factory.

I am doing a aftermarket set KC's on my 98 in next couple weeks & it does not have wiring out to bumper that I can find just looking easily. I will pull bumper off when I do it & check better as I will be putting tow hooks on front as well. Will update you on what I find. I do have plug set up behind dummy switch on dash which I will check into also. :icon_eek: