Filler Neck Question
Thread Starter
CF Veteran




Joined: Nov 2015
Posts: 2,863
Likes: 201
From: syracuse ny
Year: 1997 230,000 miles
Model: Grand Cherokee (ZJ)
Engine: 4.0, new lifters valve job with new springs and exhaust valves, preload set with shims
I need to replace it on my XJ. Does anyone know if a filler neck from the ZJ will work with some modification to the mounting screws? They look the same and the engines are basically the same 4.0.
Problem being there are a ton of ZJ necks @$25 and the XJ ones seem more rare and they want upwards of $50 for one.
I have rust on mine which makes the code set due to pinholes. I know this because the cap wont screw on without a lot of effort and can see the rust. I also clamped off the vacuum hose to the tank reset code and it runs fine without setting the Large Leak which would instantly come up.
Thanks in advance.
Problem being there are a ton of ZJ necks @$25 and the XJ ones seem more rare and they want upwards of $50 for one.
I have rust on mine which makes the code set due to pinholes. I know this because the cap wont screw on without a lot of effort and can see the rust. I also clamped off the vacuum hose to the tank reset code and it runs fine without setting the Large Leak which would instantly come up.
Thanks in advance.
Thread Starter
CF Veteran




Joined: Nov 2015
Posts: 2,863
Likes: 201
From: syracuse ny
Year: 1997 230,000 miles
Model: Grand Cherokee (ZJ)
Engine: 4.0, new lifters valve job with new springs and exhaust valves, preload set with shims
my question is if you can use the ZJ in place of the XJ filler neck.
Thread
Thread Starter
Forum
Replies
Last Post
ken72
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Oct 22, 2017 02:39 PM
XJ_Atheist
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
9
Sep 28, 2010 10:02 AM
sbielaga
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
May 12, 2010 10:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



