Shadetree

I tried to open my '88 XJ rear drivers side door today and the door handle push button pushed through and dropped inside the door. I tried to remove the pannel but can't figure out how to get the interior handle through the door pannel. I've never been inside the door pannel. I'd sure appreciate some pointers...Thanks.

Shadetree

My son took the Jeep to a shop today and they quoted him $340.08 for the repair. $289.00 for the part, $29.40 for labor and $22.40 taxes..I can't understand why it is so high...
I have searched the archives and can not find anything that is helpful..Is there a reason no one has responded to my simple question????

odgreen

Alright... I'll answer lol.. The inner handle has 2 rods on it with what I call spin clips. Reach in after you got it loose with a flat head screw driver and pop the clip off remove rod and your done. It's easy once you figure it out. And outer handles at the junk yard are any where from 15 to 40 bucks.... Depending where you go

pieced together on my iPhone using all the extra parts from my cherokee...

OverlandZJ

Interior handle... the armrest or window crank? The armrest has two phillips screws on the underside you need to remove, then you turn the armrest to unseat the top portion as you pull it off. The window crank just pulls straight off.

od covered the linkage rods, might add that there are two screws holding handle assembly to the doorframe.

odgreen

I thought he would figure out the screws lol. And the rear armrest on pre 96 just have the screws no need to pivot

pieced together on my iPhone using all the extra parts from my cherokee...

OverlandZJ

Ya never know... :wink:

Right.. forgot this was rear doors.

odgreen

Hopefully me and overland helped! If not I may be able to get pics later on the how to

pieced together on my iPhone using all the extra parts from my cherokee...

mikeXJ1020

On my 99 the two rear exterior handles both got messed up right around the same time. One of them pushed inside, and the other u would just push in and it would just stay in. (Neither of the two doors would open from the outside) I opened the door panel up for the one where the button pushed all the way inside, spent like an hour trying to make it work again. There was so much mud and gunk in there where I guess they pre greased it, I got so frustrated trying to figure it out and align this spring peice up. I called it a day and now open my rear doors from the inside

Shadetree

..Your wink was well deserved..Thanks for all the help. Now that it's done...I was thinking it was more complicated...especially since the shop, Valley Collision Center in Victorville, CA was quoting such a high price for the door handle..$289.00 for part #55024.927 (exterior door handle)....Thanks again...

Gee oh Dee

Moved to OEM tech.

Spoonman

Sometimes shops will over quote a job that they dont want to be bothered with.Congrats on getting it fixed your self!

Shadetree

Just to reply back with results...Finished replacing all outside handles and cleaned out all the crud...All my power locks and windows even work now....Thanks for all the help..