muddeprived

Where can i get some? I need some front extended links cuz i went up to 4.5" and my current links are too short. I already have the bracket that converts the stud to eye, just need extended links. I can't seem to find any that aren't SUPER expensive. I don't need disconnects.

If you know anywhere that sells me, let me know.


thanks

93XJLI

RE does, and JKS does as well... i think.

muddeprived

This is what RE has to offer:

http://www.rubiconexpress.com/Produc...=17F46D7971108

I don't know if the link is 6" eye to eye or for a 6" lift? It isn't clear in the description. I also don't know if these have the bend in them that front sway bars have. The picture shows a straight link, which wouldn't work well (tried this before). Anyone have info on this?

Here's another dealer that stocks it:

http://www.polyperformance.com/shop/...-ZJ-p-991.html

Of course it has to state which lifts it is for on all but the xj.


http://store.jksmfg.com/merchant2/me...ar_Disconnects

I really wish these were for the front cuz i'd grab a set right now. Nice to have something like that, non-disconnect. Bummer it's only for the rear....

http://www.polyperformance.com/shop/...ets-p-998.html

I might just go with this drop bracket if i can't find anything.

93XJLI

call up poly performance and ask them for measurements. the TJ rears and XJ fronts are the same mounting size IIRC. poly has VERY VERY good customer service and will help you out.

okcjeeper

Well on my lift I run the RE eye to eye style and the bushing suck..already shredded and need replacing..I plan on getting JKS discos anyways after the first of the year.

98 JeepJeep

for 30$ the RE XJ sway bar links look good if you dont plan on removing them.

muddeprived

Do you happen to know the part number of the links that came with your kit?

muddeprived

Yeah i think so too. This is what i run right now:

http://www.tellico4x4.com/product_in...1feda306f89d75


The link is too short for my lift. I think its' ideal for 3" lift, not higher.

98 JeepJeep

what size is you lift?

muddeprived

Almost 5" up front:



The links lean backwards.

okcjeeper

Here's what I have..

http://www.rubiconexpress.com/Produc...=19BEFC7977760
http://www.rubiconexpress.com/Produc...=19BEFC7977760

98 JeepJeep

I see that...Im only going 4" so they should work for me....also you didnt need adjustable lca's??....If you remove the Sway bar links you have on there for some longer ones i will buy them..Let me know...im collecting parts for my 4" kit.

mike37

extend the ones you have and make them a quick disconnect

muddeprived

That's the one i was looking at. It says 6". Is that the length eye-to-eye or for up to 6" lift?

muddeprived

I will be getting a new set. Pm me and i'll sell you these ones. They are still in great shape. I put em on and never touched em since.