Engine tempature 87 4.0
 

Hey guys so on my 1987 Jeep cheorkee 4.0 the engine temp reaches this mark and stays there and doesn’t move at all this past Thursday my local mechanic replaced the thermostat and the t-sat I bought was a 195 mopar one so what’s the issue I have also replaced the tempature sender I might add that the heat is fairly hot probally could be hotter but I’m just kinda annoyed right now
https://cimg8.ibsrv.net/gimg/www.che...f6909c90d.jpeg

The replacement temp senders are notoriously inaccurate.
But, you're saying the heat isn't that hot either?
You or a buddy have an infra-red laser you could point at the thermostat housing to verify the temp? I'm sure the mechanic would have one. Takes 2 seconds to verify the temp.

I’m going to get a laser today and we will see but no the heat is pretty hot I mean it probally could be hotter but who knows

Always best to deal with facts.

yea well I forgot to mention my last tempature sender I thought was bad because it got stuck at this mark so I replaced it but I still have the old one and that might be oem so should I retry that ?

I'd try the infra-red first.

Just to be sure, you mean the temp sensor on the back of the head, not the one on the side of the block?

yes the one on the back of the head