Engine light
#2
Junior Member
Join Date: Nov 2012
Location: Dracut,MA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Definition Evap leak detection pump pressure switch condition Explanation ECM detected the leak detection pump swith did change after solenoid was energized Probable Cause 1.-Leakdetection pump defective 2.-Open or shorted circuit condition 3. Solenoid defective
#3
CF Veteran
That's an error code from your leak detection pump. They're not serviceable- your only option is to replace it. Before you do though, check the vac lines running from the back of your intake manifold. You probably have a vacuum leak somewhere.
Thread
Thread Starter
Forum
Replies
Last Post
clark40
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-28-2015 07:11 AM
Kevin Icenhour
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-21-2015 08:22 PM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)