Electrical nightmare! Please help.
02-06-2013, 09:15 AM
#16
CF Veteran
Join Date: Feb 2011
Location: Bergen County, New Jersey U.S.A.
Posts: 3,074
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
That's what I ment I believe you remove the colum shroud and remove the ignition cylinder and the key goes into the switch? Is that the same part?
02-06-2013, 09:36 AM
#17
CF Veteran
Maybe one of your harnesses has come undone behind your instrument cluster. You might clean and snug up the connections on the back.
02-06-2013, 10:02 AM
#18
CF Veteran
Join Date: Aug 2010
Location: Canton, MI
Posts: 8,357
Likes: 0
Received 82 Likes
on
67 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Sort of. The key-in switch is part of the ignition switch. When the key is inserted into the cylinder it activates the key-in switch. It has its own two pin connector on the ignition switch.
02-06-2013, 10:21 AM
#19
Member
Join Date: Jan 2011
Location: Miamisburg Ohio
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
just a thought .... i had all kinds of ele prob on my 99 sport and found that my fuse box was bad so take a look at that ... if you have been mudding or in any deep water trail ridding water might have got into the fuse box and is shorting things out ... other than that i would check the auto start .... the question i have is when it was put on and when the problem started
Thread
Thread Starter
Forum
Replies
Last Post
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
53
04-30-2021 02:35 PM
scatgo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
03-22-2021 09:56 AM
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 08:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)