RedFang

So I got into my xj and noticed the driver seat leaned back too far I pulled the lever and the back was up as far as it could go. I got out and discovered the metal was bent up on the front left side so the bolt wasn't connected anymore. So... time to buy a new seat? If so what kind? I plan to repair this but not sure if its trustworthy.

winston427

This write up is for the 84-94 XJ seats because the seats changed in 95. However it could be a good reference for you to start with and if the process works for the 95-01 seats then you can do the write up for it.

https://www.cherokeeforum.com/f51/84...acement-23010/

RedFang

Alright well I'm going to work on the seat this weekend... I freaking fractured my ankle so I have a Imobilizer on... booo... that wont stop my jeeping XD I can drive with my left foot.

If you wanted to put a brand new seat in to replace the driver seat what brand would you go, I'm not looking top end, but not looking budget either. Something nicer than the stock seat would be good enough.