driveline vibe kickin my arse
#1
CF Veteran
Thread Starter
Join Date: Jan 2010
Location: Coeur d' Alene, Idaho
Posts: 1,316
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
driveline vibe kickin my ****
ok so ive got a driveline vibe that started recently and i cant put my digit on it.
ive checked all my mounts (tranny/engine) all u joints, pinion angle and all seems good, what the F am i missing?
ive checked all my mounts (tranny/engine) all u joints, pinion angle and all seems good, what the F am i missing?
#4
CF Veteran
Thread Starter
Join Date: Jan 2010
Location: Coeur d' Alene, Idaho
Posts: 1,316
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
out of the blue? it was fine until last friday.
pinon angle and slip yolk distances are fine. ive had this thing full flexed and have had no ploblems.
the vibe started last friday and only happens just above 25 under medium throttle and dissappears on deccel
could a ring and pinion problem cause a driveline vibe? im wondering...
its probably u-joints...havent done em yet
pinon angle and slip yolk distances are fine. ive had this thing full flexed and have had no ploblems.
the vibe started last friday and only happens just above 25 under medium throttle and dissappears on deccel
could a ring and pinion problem cause a driveline vibe? im wondering...
its probably u-joints...havent done em yet
Last edited by tannerp89; 10-19-2010 at 11:48 AM.
#6
Member
Join Date: Mar 2009
Location: stratford nj
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
i had a slightly bent front DS.. it would vibe around 60mph+ took the front DS out drove it nice and smooth replaced the DS with one from a JY vibe is all gone
#7
Senior Member
Join Date: Oct 2009
Location: Quebec, Canada
Posts: 873
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 High Output
I had the same problem with my Jeep. It ended up being my u-joints. I had to change the rear one on the driveshaft and the 2 front ones at the wheels. I got it today actually.
Trending Topics
#8
Senior Member
Join Date: Jul 2010
Location: Clover, S.C.
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
I had this problem on another vehicle, out of the blue.
Turned out that I had slung a wheel weight from the inner bead of the rim.
Drove me nuts tracking it down.
Turned out that I had slung a wheel weight from the inner bead of the rim.
Drove me nuts tracking it down.
#10
Senior Member
Join Date: May 2010
Location: Detroit, MI
Posts: 889
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
It is also possible to throw a balance weight off the driveshaft. Check visually - if you see a spot about an inch square where something USED to be...that might be it.
#11
Newbie
Join Date: Oct 2010
Location: Maryland
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: stock, spectre air intake
i got the same problem let me know what you find. i've put a new drive shaft and steering stabilizer, next is tires, then brakes
#12
Member
Join Date: Oct 2010
Location: NY
Posts: 204
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0L
Man I cant stand it.. I thought my idle was low.. so i put in brand new Injectors for my 2001.. Still VIBES like mad in drive sitting at a light.. Low level in park.. Feels like a nasty raddle .. the whole car vibes out.. I cant stand it.. I hit the gas and the thing JUMPS runs great with brand new injectors.. I thought the idle was low and bounces a bit.. I also get a clunk like sound when I engage letting off the brake only sometimes.. like its slipping in.. HELP!
#15
Member
Join Date: Oct 2010
Location: NY
Posts: 204
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0L
Mine must be a vacume issue??? I cant stand it.. idles at 700RPM jumpy a bit.. Brand new injectors put in today and no change to Vibe or Low Idle.. I changed plugs, and since its a 2001 the Coil Pack.. there is no distributor or wires on this truck. I ran Seafoam through it two times.. manually cleaned the throttle body..
Was going to do IAC and MAP next but Im not so sure it the Fing IDLE! The vibe is sitting in drive at a stop.. In IDle it vibe a little bit.. Idles Jumpy even with brand new injectors..
I wonder if Idle is low or now its a balanced drive shaft? Im cluless.. cant stand it..
I had mounts checked they are fine.. 177K on the truck.. MF!!!
Was going to do IAC and MAP next but Im not so sure it the Fing IDLE! The vibe is sitting in drive at a stop.. In IDle it vibe a little bit.. Idles Jumpy even with brand new injectors..
I wonder if Idle is low or now its a balanced drive shaft? Im cluless.. cant stand it..
I had mounts checked they are fine.. 177K on the truck.. MF!!!
Last edited by buysellny; 10-19-2010 at 08:24 PM. Reason: Mounts