Drive line function
#1
Junior Member
Thread Starter
Join Date: Mar 2015
Location: Seattle Wa
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 V6
Drive line function
I just have a question about TCase and Pinion. I attached videos below, is this normal movement for both tcase and pinion?
It's a 96 xj, automatic 4.0.
Having issues where it sometimes slams into gear when shifting out of park or into drive.
https://vimeo.com/192345603
https://vimeo.com/192345559
It's a 96 xj, automatic 4.0.
Having issues where it sometimes slams into gear when shifting out of park or into drive.
https://vimeo.com/192345603
https://vimeo.com/192345559
#3
Senior Member
Join Date: Sep 2008
Location: Sioux Falls, SD
Posts: 897
Likes: 0
Received 12 Likes
on
9 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L
Looks fine to me. Check the motor mounts, transmission mount and driveshaft u-joints for play.
Ill bet your motor mounts need replacing. Don't forget to check the mount-to-block bolts for shearing and proper thread depth.
Ill bet your motor mounts need replacing. Don't forget to check the mount-to-block bolts for shearing and proper thread depth.
#4
Junior Member
Thread Starter
Join Date: Mar 2015
Location: Seattle Wa
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 V6
Thank you.
I did just replace the motor mounts last week. The old ones weren't too bad, but doing all I can to eliminate anything easy. I changed the t-case mount sometime last year.
I did just replace the motor mounts last week. The old ones weren't too bad, but doing all I can to eliminate anything easy. I changed the t-case mount sometime last year.