Door alignment
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Are there any spacers between the top hinge and the door?
If so, you can loosen the bolts and remove one. That should help.
OR you can add one spacer to the bottom hinge between the door and hinge.
(At least I think late models have spacers.)
If so, you can loosen the bolts and remove one. That should help.
OR you can add one spacer to the bottom hinge between the door and hinge.
(At least I think late models have spacers.)
CF Veteran
Joined: Sep 2011
Posts: 4,172
Likes: 4
From: Riviera, Texas
Year: 1998 Sport
Model: Cherokee
Engine: 4.0
Thread Starter
Junior Member
Joined: Feb 2013
Posts: 33
Likes: 0
From: Virginia Beach
Year: 1999
Model: Cherokee
Engine: 4.0L 6-CYL
They both have spacers. I replaced the door (the new one sags) so I went back and loosened the bolts an did some adjusting so its better. One issue that I have though is I have to slam it for it to shut all the way. Also it's hard to open and makes a loud popping noise. I notice the new door sits farther in compared to the old one and the top right is hitting the weather stripping (the rubber that runs around the inside). If I keep adjusting it will this be fixed?
Thread
Thread Starter
Forum
Replies
Last Post
Sivadon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
Sep 24, 2015 07:31 PM
Jooman07
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 21, 2015 12:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)