I did a back yard alignment on mine, replaced the track bar with an adjustable one and balanced my tires. Cheap steps to go with for starters. And worked.

 

How much better are the ajustable track bars? And what brand should I go with? I do know that rusties has a poor quality for track bars

 

sounds like i got lucky then lol.. i have 35's and it didnt move me that much but made my hair stand on end.. i do need a new track bar.. mines stock.. sow hen you look at the front end the axle is shifted about an inch one way... so i hope that will fix my problem

 

From my understanding they don't go out as easily as stock. I don't know brands tho. Picked mine up from a friend of a friend. But I would check yours at least.

 

O ok well I got the new one under there still wobbles just not as bad

 

What about your hubs? You check them? And the bracket for your track bar wasn't hollowed out was it? I had to re drill mine.

 

Yea I checked the hubs no play what do u mean hollowed??

 

"Death Wobble" is most likely caused by your trackbar ( bad bushings, wrong angle due to lift, etc...) and/or your front end is toed out...

 

Well when I had my death wobble my track bar was not only bad but the bolt was loose on the driver side bracket. So the more I shook the more the bolt made that hole bigger and bigger on the bracket. So I had to drill a new hole or my wobble would never go away. And it will ruin a new track bar in no time.

 

Track bar, wheel alignment, bushings and bolts.
Its a pain in the head if you still can't fix this after all of these has been checked...

 

Damn found it yea the hole is huge lol so I need to drill it out or buy a new one?

 

From my experience yeah. Drill a hole just big enough for that bolt end. Or buy a new one if you want everything done right. Hell I drilled mine ill take a pic of how far over I drilled in the morning. It's midnight right now and kinda dark Haha.

 

Sweet thanks yea its late here too ha

 

There it is. I don't remember the stock hole being so far to the right side of the jeep but it's way hollowed out

 

Can u take one not to close so I can see all? Thanks lol