I fixed my death wobble.after replacing my drag link and tie rods.my pass tire was one whole inch to the right aggggghh!

measure wheel base from back RIM to front RIM ( tires tell lies ) on both sides [after making sure king pinte is straight back & forth] they have to be the same ----before this MEASURE ride HEIGHT from ground to middle of axle this will tell you if your pressure is ok for job they all have to be the same /then measure from a good place on tire tread to keep tape level as possible! where tape won't move-may need assist.back of tire tread measure to same spot on other tire---now go to front do same )what measurements don't match is where the adjustment is needed if [you are not sure OF PROCEDURE DO NOT ATTEMPT,TAKE TO a TRAINED professionalPROFESSIONAL

THIS WILL ONLY WORK IF YOUR STEERING COMPONENTS ARE IN GOOD WORKING ORDER ANY ALIIGNMENT ANY VEHICLE THANK YOU dotyjeep