![]() |
dash lights just went out
hey everybody, i went to start my jeep up an hour ago to notice the lights for the instrument cluster don't turn on when i turn my headlights on.
do you think its a fuse or the bulb? i'd just like to get a little bit of direction before i go under there and start pulling fuses.. oh and i'm terrible with electric stuff and chasing down shorts. |
Are your tail lights out?
|
i don't think they are out at least i didn't notice them being out when i drove home....but if it is something that is often connected i can run outside and check real quick, thanks man
|
if your tail lights are out its a fuse
|
I don't know what style headlight switch you have, but if you have one like mine, have you tried twisting the switch left and right(the dimmer function)? The reostats get corroded fast and sometimes you gotta do a little "maintenance" to clean them up. Mines old and I gotta do this about every couple months.
Its most likely something simple so don't fret to much |
alright i just ran out and checked (its getting chilly up here) and the tail lights come on which i was kind of hoping they wouldn't cuz then i would have it fixed already....so now its more then likely the little bulb in there behind the cluster?
|
Originally Posted by EVcherokee
(Post 747032)
I don't know what style headlight switch you have, but if you have one like mine, have you tried twisting the switch left and right(the dimmer function)? The reostats get corroded fast and sometimes you gotta do a little "maintenance" to clean them up. Mines old and I gotta do this about every couple months.
Its most likely something simple so don't fret to much |
then its prob. the headlight switch. are all of the lights out? if so i doubt they would all burn out at the same time
|
Originally Posted by 96xj4x4
(Post 747037)
i know what you mean...i fiddled with the dimmers but that didn't do anything, i never really mess with twisting them so i doubt thats it but you never know. by "maintenance" you mean i might want to try popping the thing off and having a look in there?
I'm going off my Chiltons, which aren't FSM's, but have you checked the 5amp fuse labeled "INST LPS"? The schematic in from of me shows power going to the 15amp "PARK/TAIL" fuse(the one you checked), then to the headlight switch for the head/tail lights. However theres a wire that is connected to the headlight switch that goes back to the fuse panel to the 5amp fuse(ISNT LPS) that powers the instrument lights. Do you have lights working in other places on the dash? or is just the instrument lights out? |
If the 5 amp is good, leave it out and check the terminals for voltage. if there no power at all on either terminal, like sflxj said, its probably a bad headlight switch. There not to hard to swap, just follow the manual, or get pissed off and break your dash like my PO did.
|
Originally Posted by EVcherokee
(Post 747073)
No, by maintenance, i meant twisting it every now and again to clean corrosion off. I don't touch mine either, but every once and a while my insturment lights stop working. You don't need to pull it.
I'm going off my Chiltons, which aren't FSM's, but have you checked the 5amp fuse labeled "INST LPS"? The schematic in from of me shows power going to the 15amp "PARK/TAIL" fuse(the one you checked), then to the headlight switch for the head/tail lights. However theres a wire that is connected to the headlight switch that goes back to the fuse panel to the 5amp fuse(ISNT LPS) that powers the instrument lights. Do you have lights working in other places on the dash? or is just the instrument lights out? |
Originally Posted by sflxj
(Post 747065)
then its prob. the headlight switch. are all of the lights out? if so i doubt they would all burn out at the same time
|
Originally Posted by EVcherokee
(Post 747083)
If the 5 amp is good, leave it out and check the terminals for voltage. if there no power at all on either terminal, like sflxj said, its probably a bad headlight switch. There not to hard to swap, just follow the manual, or get pissed off and break your dash like my PO did.
|
Bulb..
just take your time getting to it, you'll be fine:thumbup: |
alright john and EV thanks for your help. i feel like i have a pretty good idea of where the problem is coming from now. happy turkey day tomorrow! i'll be tinkering with the heep lol
|
| All times are GMT -5. The time now is 12:52 AM. |
© 2026 MH Sub I, LLC dba Internet Brands