Dana 30 rebuild
#1
Newbie
Thread Starter
Join Date: Nov 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 straight 6
Dana 30 rebuild
I'm looking for help on re gearin my front dana 30 on my 92 cherokee. Wut gears. Reversed or wut and other things i would need. Please let kno wut u think.
#2
Seasoned Member
Join Date: Nov 2008
Location: Belmont, NC
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
if its a high pinion, then it takes reverse cut gears. low pinion takes standard rotation.
for anything higer than 4.10, the stock carrier will work. for anything lower (numerically higher) ie. 4.56/4.88 you will need the carrier for 4.10 and lower.
find a good gear guy. Its not the kind of thing i would recomend "trying to figure out" buy good gears (yukon, ect.) and a master install kit. If you are anywhere near the charlotte, nc area i can refer you a great gear guy who would be much cheaper than any shop.
for anything higer than 4.10, the stock carrier will work. for anything lower (numerically higher) ie. 4.56/4.88 you will need the carrier for 4.10 and lower.
find a good gear guy. Its not the kind of thing i would recomend "trying to figure out" buy good gears (yukon, ect.) and a master install kit. If you are anywhere near the charlotte, nc area i can refer you a great gear guy who would be much cheaper than any shop.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
06-17-2023 03:57 PM
Lightning_19k
Modified XJ Cherokee Tech
14
10-03-2015 09:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)