Crank? Cam? Bearings?
Thread Starter
Junior Member
Joined: Apr 2012
Posts: 42
Likes: 0
From: Prescott, AZ
Year: 1994
Model: Cherokee
Engine: 4.0
Crank? Cam? Bearings?
Alright, so 2 days ago I blew something up in the bottom of the motor. It was knocking, but I managed to get it into the garage.
So today I dropped the oil pan and I've got penny sized and smaller, thin shavings of metal all over the pan. The pistons and rods look fine, everything is still connected.
What do yall think it could be? I'm still halfway through taking apart what I'm going to take apart, but I figured id get a head start on posting this thread. I'm going to disconnect the rods from the crank and look at it next.
So today I dropped the oil pan and I've got penny sized and smaller, thin shavings of metal all over the pan. The pistons and rods look fine, everything is still connected.
What do yall think it could be? I'm still halfway through taking apart what I'm going to take apart, but I figured id get a head start on posting this thread. I'm going to disconnect the rods from the crank and look at it next.
Thread
Thread Starter
Forum
Replies
Last Post
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
Jun 17, 2023 03:57 PM
91cherokeeSC
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
41
Oct 29, 2015 01:49 PM
Jeremy Millner
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Oct 2, 2015 02:21 PM
Joshuapn
Other Vehicles. Other Jeep models & cars and trucks of other makes
1
Sep 25, 2015 08:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)