If i get control arm drop brackets do i still deed to get longer control arms?????

 

what are using for arms right now?

i always recommend adjustable uppers and lowers

 

i am running stock arms right now

 

Wtih 6.5" of lift you will definitely need adjustable ca's top and bottom.

 

buy a long arm kit!!

 

If you buy DB's you can run the stock upper and lower arms.... I did it on one of my rigs... and it flexed well. My only advice would be to box you upper and lower arms by welding some plate to them.


If you are going to run DB's get an adj trac bar though.

 

ya man the long arm kit from rustys is like the same price as if you where to buy teh drop brackets and a set of adjustable arms......get long arm!

 

but if decide not to get long arm, i run drop brackets from RC, stock arms, and adjustable trac bar from rustys, with 5" of lift and my jeep flexes like nobodys buisness. so either way works

 

friend of mine ran rustys longs arms on his xj ended up makin his own after about a year they were crap and so was his adjustable trac bar id go with RE or TNT adjustable trac bar.

 

thanks guys i think i will go with the RC lowering brackets for now just cause money is tight i appreciate the imput

 

This is my rig before we truggied it on RE db's with stock upper and lower arms, with a 2" chevy drop shackle in the rear, as well as SOA. The front was Rusty's 6.5 coils with RE hd trac bar mount and brace. All of these parts were bought used




Here is a pic of the flex it gave me... This pic was Taken at Tellico

 

yea that looks llike it will work for me hey guys keep a look out for some drop brackets thanks!