I have a clunking noise from my upper control arms. I replaced the bushings and during the install the bolts didn't seem tight in the bushing sleeve. I just think the P.O. changed the bolts and replaced them with the wrong ones. Does any one know the stock size bolt and the length. Thanks to whoever comes up with an answer to this strange question. I know I should have brought the arm to the parts store and got bolts but I didn't have time, its my DD.

 

I guess I'll have to pull one again.

 

Sorry I think I am 7 years too late LOL. If you found the answer can you please post what it is? I'm not really sure myself. Only what I have seen in a couple posts that other people have replied to. I am searching for the answer myself because mine are about 20 years old and rusted and impossible to get off. I saw on another post this person gave this answer:

https://www.cherokeeforum.com/f2/low...-bolts-174780/

07-21-2013, 09:35 PM
Dan91
CF Veteran
Join Date: Sep 2009
Location: Williston, North Dakota
Posts: 1,295

"They are metric M14, but if I recall correctly a 9/16 bolt will fit it properly, easier to find than a metric of the proper grade. Make sure you use grade 8."

and another post someone else said:

https://www.cherokeeforum.com/f2/low...m-bolts-76417/

02-07-2011, 08:32 PM
UserID6095
Newbie
Join Date: May 2009
Posts: 3

“M14-2.0 x 110, grade 10.9.”