Nope, my statement was perfectly accurate. I stated that I got the exact same pipe but for a different year from Advance, and that you might want to check them out for some pricing for your part.

I will make sure, however, to never post any potentially helpful suggestions on any of your threads again, that's for sure.

 

Oooh, XJGirl, are you a Red Head?

 

Haven't ordered this pipe yet, but as I was looking at the pics of it again, I noticed that there are 2 pre-cat O2 sensor bungs. How is that possible?

In any case, does anyone know if the bung is a standard size? I found a seller that has plugs/caps that screw in to cap them. I would only need to cap back one as the front one is for the front O2 sensor and the bung on the cat is for the rear one.

 

I run the walker downpipe from advance, idk why people are basing the crimped style. But if your stock height with 4x4, DONT install a downpipe without the dent or the front yoke will make the dent for you. Or you can bumpstop to prevent this.

 

I just ordered it. Ill post back. I got the 55277 for my lifted '97 XJ. This was the 2.5" pipe. No dent. $52 shipped from Amazon (NAPA was $81). Already have a new Magnaflow hi-flow cat 2.5" waiting to be installed.

 

Crawler, any update? I'm interested in purchasing the same one (Walker 55277). Can you confirm it is 2.5" and no-dent?

Thanks.

 

Hey there. Just put in my 2 cents on this older post? I ordered this downpipe from amazon with a new cat from autozone. Didn't have time to order another new cat from amazon. This pipe works great. Has the hole for the O2 sensor in the front. And passed inspection. So I don't understand what the argument is between everyone but this is better than a rusted pipe like mine was.

 

Sorry, been busy. No dent. Confirmed.

It's 2.5 about 70% of the pipe. I think the first part maybe 2 1/4"? Hard to tell 100%. It maybe 2.5" all the way. Just not 100% there. But, no dent.

 

Its 2 1/2 at the front where it meets the exhaust manifold. Then goes down to 2 1/4. At least that's what the description said and what the mechanic at quantico said.

 

It's in my garage. It looks reverse. Where it meets the manifold, it looks 2 1/4", but where it meets the cat, it looks 2 1/2"

 

In my 1995 3" lifted XJ is the lack of dent going to cause a problem?

 

No

 

yeah i have the same pipe. P# 55277. its only 2.5" gointo the cat by a few inches. the nice thing is no dent and no pre-cat. along with Mudfrogs high flow cat and 2.5" catback with a spr 44. i love the sound.

when i got the down pipe about a year ago, i could not find any full 2.5" down pipes without buying a header too.

love the sound nonetheless. I get compliments all the time.