Clutch problems!!

Reply Subscribe

Thread Tools

Search this Thread

Nov 11, 2010 | 08:04 PM

#16

harorider848

Junior Member

Joined: Jul 2010

Posts: 89

Likes: 0

From: beaufort sc

Year: 1996

Model: Cherokee

Engine: 4.0

yup id go with a new flywheel i fought a clutch in a cj for months. i dont no why a flywheel that got turned too many times never came to my head.

Nov 12, 2010 | 07:41 PM

#17

whiteclimber1

Thread Starter

Newbie

Joined: Mar 2010

Posts: 10

Likes: 0

Model: Cherokee

Thanks all. I have never machined the flywheel before but I was considering doing it before I put it back in. I really appreciate the advice. I will definitely just put a new one in.

Nov 24, 2010 | 12:06 PM

#18

whiteclimber1

Thread Starter

Newbie

Joined: Mar 2010

Posts: 10

Likes: 0

Model: Cherokee

Problem solved

Just to give an update for anyone that is researching a similar issue. It works!!! After replacing the flywheel, pilot bearing, clutch disk, pressure plate, and throw out bearing. All parts looked to be in great condition (with the exception of a couple hot spots from the disk riding after the clutch stopped working) The pilot bearing was not cocked, no cracks in the pressure plate tines that I could find. Clutch fork and throw out bearing had full range of motion. But I decided to be on the safe side and just replace everything and put it back together.

P.S. Word to the wise. Make sure you disconnect the plug on the Crank Shaft sensor when you take the transmission out. It is hiding almost directly on top of the bell housing.