Here's my problem guys...last year i replaced my clutch, concentric release bearing, and flywheel. 2 days ago, replaced the clutch MS. Apparantly, there was a machining issue with the one from my work, so it failed after about 2 hours. Replaced with another one last night. This one works in the respect that the seal isn't blown out. but when i go to start in gear, there is resistance in the pedal as i'm easing off it. After the clutch engages, it feels fine. Also, as i hit the clutch initially, there is a subtle pulse right about where the disengagement point is. It never did this before i swapped MS...I'm absolutely stumped! Any help would be awesome!