blondiesjeep

ok like I said I have never worked with jeeps before and or a unibody for that matter but my friend was hit in the right rear the other day and she asked me to fix it sense I seem to be the high school car wiz lol. but she ruined her rear bumper, right plastic bumper cap and right rear tail light this being said I have found all the parts of 60 bucks in the local junk yard so I’m heading out to pick and pull them this weekend. now what I need to know is the easiest way to remove and replace the bumper to add to this mix she is super busy this week which means I will be doing this fix in the school parking lot so any tools I need I will have to bring so if yall could tell me what to have that would be great.

blondiesjeep

Details I left out like an idiot is a 94 xj sport 4 door with black? Bumper idk if chrome vs. black makes a different

DaddyCat

if you can get some PB Blaster on the bolts days before the removal you'll have less trouble.
Read these:
http://www.jeepforum.com/forum/f11/h...erokee-548852/

http://www.jeepforum.com/forum/f11/r...emoval-790403/

blue_on_blackXJ

The bumper bolts are 15 mm. If you take it off by the two sets of four bolts don't use a deep well on the tops... **** that hurt trying to get it out! If you take off the two bolts per bracket that are actually attatched to the bumper, well...have fun turning the top one 1/gnats *** of a turn at a time. You'll see what I'm talking about when you look at it.