changed my taillight color. Opinions
#2
Seasoned Member
Join Date: May 2010
Location: Suffolk long island
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 L I6
I really didn't like the yellow in the tail lights or the white for that matter.
I like the look of the older tail lights with the white stripe. So heres what I came up with. What do you think.
Attachment 41124
Attachment 41125
Attachment 41126
Attachment 41127
Attachment 41128
please excuse my dog slobber on the rear door in that last pic.
I like the look of the older tail lights with the white stripe. So heres what I came up with. What do you think.
Attachment 41124
Attachment 41125
Attachment 41126
Attachment 41127
Attachment 41128
please excuse my dog slobber on the rear door in that last pic.
Than again, im a huge fan of blacked out lights, you should sand it down and do a light coat, smoke them grey.
And your worried about dog slobber? you cant even see my paint its covered in mud and i have a pine branch hanging off my roof rail it looks like a bucks rack.
#6
Member
Join Date: Feb 2010
Location: Burtucky,Michigan
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
They look clean and simple.I like it.How did you do it and how does it affect the brightness of the lights?. When I bought mine it hade those TERRIBLE eurocrap lights in it. I had a guy come over (in an xj)to buy a set of tires from me and I talked him into trading me for his stock ones.
Trending Topics
#10
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Wekiva, FL
Posts: 888
Likes: 0
Received 2 Likes
on
2 Posts
Year: 99 sport
Model: Cherokee
Engine: 4.0 i6
that is exactly what I was going for.
as for how I did it.
1. a little sanding with a high number paper.
2. electric tape for the white stripe over the clear part of the light
I like the way electric tape bonds to plastic
3. most important you need to buy testers (testers is the brand) transparent paint. The research I did came with transparent candy apple red as the color. I went with transparent hot rod red. It took 2 coats to cover the yellow and red out the white. I also went over the edge of the electric tape with a blade after it dried to give an even pull off of the tape.
Rear visibility is about the same with a little red tint.
as for how I did it.
1. a little sanding with a high number paper.
2. electric tape for the white stripe over the clear part of the light
I like the way electric tape bonds to plastic
3. most important you need to buy testers (testers is the brand) transparent paint. The research I did came with transparent candy apple red as the color. I went with transparent hot rod red. It took 2 coats to cover the yellow and red out the white. I also went over the edge of the electric tape with a blade after it dried to give an even pull off of the tape.
Rear visibility is about the same with a little red tint.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
Tcq192
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-23-2015 09:25 AM
vegasXJ-Davey
Modified XJ Cherokee Tech
0
09-07-2015 09:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)