if not ill lift more

 

Hmm would be tight but I'd think possible with proper bump stops and fender trimming..Although I think I'd add an extra inch of lift and take it to around 5-5.5 of lift..

 

If you have 4.5" of lift then try the bumpstops and a little trimming. If that doesn't work for you then you can always add some spacers. But try the bumpstops first.

 

trim and bumpstop. they will fit quite well

 

thanxs

 

if i get my job i am going to do a 6 inch springs and keep my spacers and ext. shackles

 

how does ktm have pics of an xj 4.5 with 37s? is that a joke

 

not a joke, thats what he runs. his old 91 was about 4" or less on those 37's and D44 front with a D60 rear. anything can be done with enough trimming and bumpstopping. i was going to run 35's on my 4.5" lift cause the 33's look tiny haha but i don't want to run em on a D30 so i'm sticking with 33's and might lower it a bit

 

It's possible. TnT has an XJ with 3" and 35's, you just have to trim and bumpstop it. In the rear they went past the spot welds and rewelded the quarter to the innerfender. It's looks very clean and and performs extremely well.

 

got any pics of 3 in with 35? what do you do about the back wheel wells ? replace them with a 55 gallon drum or racing tubs?

 

Why not go with 35s? Much more common tire size.. unless you really want 34s? But yeah it can be done.

 

yea but if you have too much bumpstoping doesnt that limit your flex a lot?

 

ya thats why i don't want bump stops but i got them [34s] for a sub and amp trade

 

sam i hope you don't mind me posting this.

its all about the droop

 

Some of you are lucky. I can't even fit 31's on a 3.5" lift.