The A/C compressor engages when I jump a wire from the positive to the battery but is not getting power . Dont know if the compressor will run tho. I even tried tricking the lp switch by jumping it to its self ( works when I do this to a A/C unit at work) and still no power. What am I missing?

 

When you turn on ac does plug to swich get energized ? Also is compressor clutch grounded thru harness ?

 

Which plug exactly and yes I believe it is because I can take a wire from the battery and touch it to the plug on the compressor and the clutch engages

 

The plug to pressure switch on dryer just behind compressor and below see if it getting juice when switchs on .

 

Yes it is

 

When you jump it com clutch should engage

 

It does if I run a wire from the battery to the power wire on the compressor other wise still no power

 

If ya got power running in and you jump plug is there power coming thru other wire on plug?

 

No its not

 

Bad plug .

 

The lp switch plug is good it gets power I took a wire split it and stuck it in either side touch my lead to it and touched the negative lead the the battery. Sorry got confused there. I have a plug on the orange power wire to the compressor.

 

No you just cut the wires to plug and splice in new plug or buy theses and eliminate plug for further testing .

 

Don't ever by pass a pressure switch for more than a second or two bad things can happen if you do.

 

I have a bunch of these and sorry edited my prior post got confused on which plug again sorry.

 

Ok so you have power thru ac pressure switch plug out to clutch .correct