Brake Lines
09-08-2009, 03:37 PM
#1
Member
Thread Starter
Join Date: Jun 2009
Location: Central NY State
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Brake Lines
Is it possible to find OEM like brake lines for the XJ. Guess I'm looking for pre bent lines with the protective metal coil over the lines.
09-08-2009, 04:11 PM
#2
CF Veteran
Join Date: Mar 2009
Location: Visalia, Kalifornia, ussa
Posts: 2,750
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
These are OEM http://www.moparpartsamerica.com/par...layCatalogid=0
Don't know why you would want to pay 4x as much as parts store for them.
Don't know why you would want to pay 4x as much as parts store for them.
09-08-2009, 05:49 PM
#3
Member
Thread Starter
Join Date: Jun 2009
Location: Central NY State
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Thanks for the reply 93gc40. I wasn't clear about what I was looking for. I need rear solid tubing going from the center junction on the rear axle to the rear wheel cylinders. I would like prebent lines with the protective metal coil around the solid metal tubing. I mentioned "OEM like" but I didn't necessarily OEM. Would you have any links for them?
09-09-2009, 01:21 PM
#6
Junior Member
Join Date: Jul 2009
Location: Glen Burnie, MD
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
Most auto parts stores will sell pre-flared (thats the hard part) lines for pretty cheap. Bending the lines isn't bad at all, either buy/rent/borrow a tube bender or just go slow and be careful.
You'll need 3/16" lines with 3/8" fittings.
You'll need 3/16" lines with 3/8" fittings.
Thread
Thread Starter
Forum
Replies
Last Post
Bearstream
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
11-04-2022 10:19 AM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)