brake, hazard and turn signal problem
#1
Newbie
Thread Starter
Join Date: Dec 2013
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
brake, hazard and turn signal problem
So I've read lot of post about problems with the lights and I've tried everything I've read. So here is my problem. I have a 1996 Jeep Cherokee classic 4L 4wd. So my headlights work and my reverse lights work. My brake lights, turn signals, hazards, and running light all do not work. I've checked the bulbs(good), checked all fuses and relays, replaced relays with brand new ones. I've traced all the wires, I found one wire that was broken that ran to the headlights so I fixed and that didn't fix my problems. I've replaced the headlight switch and multifunction switch with brand new ones. My jeep does not use the 3 pronged round flashers it uses the square 5 pronged one. I replaced that with a new one. So that's everything I've already tried. I have not tried test the voltage with a meter because I don't know what to test. Anybody got any ideas? If you need more info let me know.
Thread
Thread Starter
Forum
Replies
Last Post
BayArea93xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-11-2016 10:43 AM
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
08-30-2015 03:17 PM
Whjs416
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
08-29-2015 10:12 AM
rusty_bucket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-29-2015 06:42 AM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)