Rock Auto generally has them. I paid $70 for my no.2 solenoid.

 

Ouch. The whole set of 3 is only $54 on Amazon.

Add $21 if you want to replace the filter and pan gasket. Typically, you can just rinse out the mesh screen filter.

 

I found mine on Craigslist.

 

I keep getting the p0700 code no other codes along with it. I've replaced the tcm I've had a service done on the tranny. Code keeps coming back.. usually go for a ride sometimes short sometimes long. Park shut it off for about about 20 mins and start driving home and code pops on.. its not always the same routine but id say 75% of the time it's how it Happens.. ive bought the ebay solenoids but have not yet installed them. I recently discovered I had a burnt relay for my blower motor and part of my register plug.. ive since replaced all the bad wiring and bad relay. I noticed on my haynes manual that the lock up solenoid is part of that relay.sometimes it dont like to go into 4th gear or lockup? And sometimes it has a long shift? Do you guys think it could be my solonoids. To be honest this code is driving me crazy.. thx for reading this and any advise is much appreciated..

 

Some Trans wiring pics. Check ohms on each solenoid, and power each up. They make sounds if working....

 

C14,15,16 are solenoid wires.

 

where is that connector is it the one comes up in between heater hose and engine area. ?? I plan on testing my old ones but I will prob go ahead and swap em out.. do u think my issue lies in the solenoids?

 

Tcu plug harness. You can test solenoids using the correct pins from the interior of yer xj

 

FSM has testing procedures to see if you have a non- solenoid issue. Pressure check, not difficult at all.

 

Where is FSM?? I know I can prob test em from the tcm connector but I'm not really a electrical kind of guy lol.. whats this pressure test??? Thx for all your advise

 

Factory service manuals are available free on the i'net. There are test ports on the side of the Trans. Can see how much force is made in each gear. Way of diagnosing non solenoid issues. Not a hard process.

 

Some info

 

More info

 

cdn.xjjeeps.com. just saw a pdf manual for aw4.

 

free download the FSM from this site, its on the webpage of the admin guy, forgot his nic..sorry man!

P0700 may also be set by the NSS I believe, it should be taken out and cleaned