Battery hold down necessary?
#1
CF Veteran
Thread Starter
Battery hold down necessary?
Simple question is the battery hold down really needed? I ran without it the whole time i owned it but came to mind when poking around under the hood. I noticed alot of junkyard jeeps dont have them either.
#2
CF Veteran
Join Date: Dec 2015
Location: PA
Posts: 3,038
Likes: 0
Received 333 Likes
on
277 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
You should always use a battery hold down. Without one the battery flops around like a fish out of water. You can stress the cables if they dont have any slack in them (G100, for example), and the battery could jump up and hit the hood if the road (or trail) gets rough. Most are missing from the salvage yards as they get tossed aside when the batteries are pulled and fluids drained. Sometimes theyll toss them back into the engine bay or inside the vehicle. All the ones i have come across were pretty trashed anyway from rust and corrosion.
#3
CF Veteran
Thread Starter
Good point. When i replace my battery cables ill get a new tiedown kit online if there is any. Trying to somewhat make my jeep nice lol its a work in progress.
#4
Junior Member
Join Date: Dec 2013
Posts: 39
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
I've never ran without a hold down. You won't either after you hit a hole when you're wheeling, and your battery ends up welded to the underside of your hood. (Not me, seen it happen at a mud drag race though..)
Then again, short cables could keep that from happening....
Then again, short cables could keep that from happening....
#5
CF Veteran
Join Date: Oct 2011
Location: SEMO
Posts: 1,394
Likes: 0
Received 7 Likes
on
7 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0 L6
I would consider it in other vehicles for a temporary measure, but as close as the posts are to the underside of the hood in an XJ, no way I'd drive without a hold down.
#7
CF Veteran
Join Date: Nov 2010
Location: In the middle of Minnesota!
Posts: 5,805
Received 99 Likes
on
88 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Batteries left loose inside the engine bay can vibrate and cause the battery to fail. An unsecured battery can also fall into the moving parts of the engine and cause damage. Acid can also leak from the battery damaging the engine, components and paintwork. Unsecured batteries can also ‘short out’ on metal parts under the bonnet and cause a fire or explosion.
So yup, it is important to secure all batteries using appropriate hold down brackets and clamps
So yup, it is important to secure all batteries using appropriate hold down brackets and clamps
Trending Topics
#8
Banned
Join Date: Feb 2014
Location: Florida
Posts: 2,379
Likes: 0
Received 13 Likes
on
12 Posts
Year: 2000
Model: Cherokee(XJ)
Engine: Golen 4.6L
I was missing mine and couldn't find one in the junk yard because they usually toss them when they remove the battery. I finally found one that they had tossed aside in the engine bay and immediately grabbed it. You could always just make one out of a metal strap until you can get a real one.
#9
CF Veteran
Join Date: May 2012
Location: Lost in the wilds of Virginia
Posts: 7,964
Received 952 Likes
on
767 Posts
Year: 1998 Classic (I'll get it running soon....) and 02 Grand
Model: Cherokee (XJ)
Engine: 4.0
I've never had one in my 97, but now I need to get one to pass inspection.
It really isn't a good idea to run without one.
It really isn't a good idea to run without one.
#12
Senior Member
Join Date: Jan 2017
Location: usa
Posts: 799
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2000
Model: Cherokee
Engine: 6 cylinder
tjwalker Wrote: Batteries left loose inside the engine bay can vibrate and cause the battery to fail...
I wouldn't leave home with any of my vehicles without a secure OEM type battery hold down.
Having said that, i hold my 'ol Farmall tractor's battery down with bungee cords! But it never leaves home! lol
#13
CF Veteran
Join Date: May 2015
Location: Arizona
Posts: 4,481
Likes: 0
Received 16 Likes
on
12 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Good morning everyone... I hope everyone is doing good. I have been coming and reading once in awhile. But this post made me want to come add my 2 cents about how important battery hold downs truly are. Anyone who has worked in the towing and recovery business like I have has witnessed what can happen if your car rolls or lands upside down in an accident with no hold downs.
Far too many times I have witnessed whole families, vans or buses full of victims burn alive because there was no hold down. They don't send a fire truck out to every accident because there is a fire... they send it out to prevent a fire. The first thing they do is cut the battery cables to prevent shorting and arcing at the battery because electrolyte is highly flammable. 99% of flaming accidents are caused by the battery arcing.
Your battery hold down is your most important fire prevention device if you are involved in an accident!
Far too many times I have witnessed whole families, vans or buses full of victims burn alive because there was no hold down. They don't send a fire truck out to every accident because there is a fire... they send it out to prevent a fire. The first thing they do is cut the battery cables to prevent shorting and arcing at the battery because electrolyte is highly flammable. 99% of flaming accidents are caused by the battery arcing.
Your battery hold down is your most important fire prevention device if you are involved in an accident!
#14
CF Veteran
Thread Starter
Yeah i was just curious. Sounds like its very important..... The old owner actually hammered the ever living P*** out of that metal part thats very close to the battery so he could fit a marine battery in its place. So im not sure if that would make any difference but youre right im gonna get a new hold down, I want my jeep to be safe and actually its coming along from what it was before lol just a bit of money and itll be like new again thats why i ask these questions. Thanks all for the knowledge.