Axle Welded itself on.
Thread Starter
Newbie
Joined: Sep 2010
Posts: 3
Likes: 0
From: Moorhead, MN
Year: 1992
Model: Cherokee
Engine: 4.0 6 Cylinder
Hey guys,
Im new to this, but I recently replaced the passenger side front U-joint, and now Im on the drivers side. I have the caliper off, and the hub off. I took out the 3 bolts in back, which were extremely rusted and difficult to get out, and now I'm having a difficult time getting the axle out as it appears to have rusted/welded itself. I have been using a chisel to try and break it free, but just wont budge. Anyone have any suggestions???
Thanks!
Titus
Im new to this, but I recently replaced the passenger side front U-joint, and now Im on the drivers side. I have the caliper off, and the hub off. I took out the 3 bolts in back, which were extremely rusted and difficult to get out, and now I'm having a difficult time getting the axle out as it appears to have rusted/welded itself. I have been using a chisel to try and break it free, but just wont budge. Anyone have any suggestions???
Thanks!
Titus
Thread Starter
Newbie
Joined: Sep 2010
Posts: 3
Likes: 0
From: Moorhead, MN
Year: 1992
Model: Cherokee
Engine: 4.0 6 Cylinder
thanks guys!
That did the trick! I also got a better chisel and hammer. Only took 5 minutes.
I almost went with plan "B" and handed my Neighbor the hammer and grabbed a beer. :^)
Thanks again!
That did the trick! I also got a better chisel and hammer. Only took 5 minutes.
I almost went with plan "B" and handed my Neighbor the hammer and grabbed a beer. :^)
Thanks again!
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Jul 5, 2022 12:19 AM
travellinmike
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Sep 11, 2015 05:11 PM
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 6, 2015 03:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



