http://cgi.ebay.com/ebaymotors/Jeep-...=p4506.c0.m245

 

I don't have it but have read good stuff about it since it is a Rugged Ridge part it will be fine. I think it raises the tierod a bit so you have better clearance.

 

well i need new tie rods and the draglink tierod is bad so this is only like 50 bucks more

 

I have it and have no complaints about it. It has held up pretty well.

 

Does it replace your existing steering linkage ?? Or what ??

 

dreadhead, how much lift do you have? Do you have a drop pitman arm?

 

Is this the kit that requires reaming?

 

I'm running that kit on my ZJ. No reaming bolts on, but won't clear the stock wheels...

 

it bends pretty easily on the rocks.

 

I think I would look into this ...

http://shoplive.rompalicious.com/ind...oducts_id=1946

 

^ Agreed.

 

From what I have read on the rugged ridge it is solid but I was told you would need a drop pitman arm for it to align properly with the trackbar..I could be way off that's just what I was told.

 

The rugged ridge has no real issue with out drop pitman arm as long as your under 5.5" of lift, that was where I started having "binding" issues...

 

I am ordering the Rugged ridge set up today. If I need new wheels so be it .

 

That Crown setup is what I recently switched to. It came fron Gerroffroad one of our trusted vendors It does not come with the stabilizer shock but I don't like those anyway so that did not bother me. Rugged ridge is good quality too. I would not have a problem buying either kit.