Any one help me with that
#1
Junior Member
Thread Starter
Join Date: May 2012
Location: Saudi Arabia
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0L
Any one help me with that
hi guys*My xj 2000 not shifting and no overdrive*
I got the code p0753Shift solenoid A electrical
Sometimes i got code p0743Torque converter clutch circuit electrical
*I need help with picture below which one the shift Soleniod
Which one is shift solenoid A
I got the code p0753Shift solenoid A electrical
Sometimes i got code p0743Torque converter clutch circuit electrical
*I need help with picture below which one the shift Soleniod
Which one is shift solenoid A
Last edited by Sadoon; 09-28-2012 at 12:24 AM.
#2
CF Veteran
Join Date: Apr 2012
Location: Wisconsin
Posts: 5,302
Likes: 0
Received 19 Likes
on
16 Posts
Model: Cherokee
#3 is the lockup solenoid. If you haven't already, measure the resistance of the solenoids. Should be roughly 8-11 ohms. If they check out OK, take a look at the wiring harness.
Last edited by Radi; 09-28-2012 at 01:27 AM.
#3
Junior Member
Thread Starter
Join Date: May 2012
Location: Saudi Arabia
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0L
I check them all ....
one of them is lean its the first one from left side
I think its the problem
the two others looks good and soooo noisy
I measure the resistance of them all same ohm !!
I think i will change them all
one of them is lean its the first one from left side
I think its the problem
the two others looks good and soooo noisy
I measure the resistance of them all same ohm !!
I think i will change them all
#5
Junior Member
Thread Starter
Join Date: May 2012
Location: Saudi Arabia
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0L
I cleaned them all and check for volts two solenoid r good except the first one like i said is lean
One more thing the contact not tight enough in the solenoid its shaking when i touch it
I'll change it to see
One more thing the contact not tight enough in the solenoid its shaking when i touch it
I'll change it to see