I know that there a lot of threads on this already..... I just wanted to get some fresh ideas. A friend of min that is a Master Tech is helping me but he has not done a lot of work on Jeeps.

When going in reverse with the wheel turned right or left there is a loud popping noise. Sometimes when going forward it will do the same or a lot of smaller popping. Most of the noise seems to be coming from the driver side.

Just replaced the wheel bearing and U joint on that side and torqued down all bolts in the front. The noise is still present....

Any ideas would be great! Thanks in advance.

 

Probably trac bar

 

track bar, tre's on tie rod & drag link @ pitman.....?

 

Thanks for the input. I will check all of those.

 

check the sway bar/links as well. had a similar issue and after months finally found it was a loose bracket.