Annoying *** whine... Vacuum line?
When I start up my ar, everything is fine up until like 3min of it being on. After that (it seems to be the same time interval), an annoying whine arises from the engine bay lmao. Seems to go away when I apply throttle, but when I let off or I am idling/parked, it just whines away. Sooo annoying. Does anyone have a clue where this is coming from? Common problem perhaps (hopefully..)?
Member
Joined: Dec 2008
Posts: 201
Likes: 0
From: Winterpeg,Canada
Year: 1998
Model: Cherokee
Engine: 4.0l
tell the kids to keep quiet....wait that's my kids.
lift the hood when it's running, no loose fitting clothes!
try cycling the a/c on and off.[if you have it] does it change tone? turn the steering left and right, low power steering fluid can give all types of noises.
one thing to also try, remove the serp belt,[if you can] STOP the engine first and then remove it. start the engine, ONLY RUN IT A SHORT TIME! is the noise still there? this will eliminate the accessories. ie: p/s,idler pulley/tensioner/alt/a/c, etc. noise gone? still there? if still there a vacuum leak is possible. good luck.
lift the hood when it's running, no loose fitting clothes!
try cycling the a/c on and off.[if you have it] does it change tone? turn the steering left and right, low power steering fluid can give all types of noises.
one thing to also try, remove the serp belt,[if you can] STOP the engine first and then remove it. start the engine, ONLY RUN IT A SHORT TIME! is the noise still there? this will eliminate the accessories. ie: p/s,idler pulley/tensioner/alt/a/c, etc. noise gone? still there? if still there a vacuum leak is possible. good luck.
Thread
Thread Starter
Forum
Replies
Last Post
ToxicFox
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Sep 27, 2015 06:56 PM
Endlessknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 26, 2015 03:20 PM
Joshuapn
Other Vehicles. Other Jeep models & cars and trucks of other makes
1
Sep 25, 2015 08:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



