alignment?
04-20-2009, 09:07 AM
#1
Junior Member
Thread Starter
Join Date: Feb 2009
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
alignment?
I was going to get an alignment this week but i have the death wobble and i was going to replace the ball joints and the tie rod ends and the steering stabilizer. Should I do this before i get an alignment? Or should i wait to see if its gone? I also have and adjustable trac-bar that they are going to adjust for me to.
04-20-2009, 09:11 AM
#2
Seasoned Member
Join Date: Apr 2009
Location: Nashville TN
Posts: 470
Likes: 0
Received 4 Likes
on
3 Posts
Model: Cherokee
Install all of your new parts before the alignment.
Get the track bar as close to the right length as possible so you can safely drive it to the alignment shop.
Get the track bar as close to the right length as possible so you can safely drive it to the alignment shop.
04-20-2009, 09:41 AM
#4
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Yes a trac bar that is out of adjustment could cause the issue. Definitely replace the ball joints, tre's and adjust the track bar then get the alignment. Also make sure they adjust the caster as well as toe in/out.
Thread
Thread Starter
Forum
Replies
Last Post
sajohnson05
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-24-2015 07:45 PM
Jooman07
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-21-2015 12:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)