alginment report included.. camber angle?
#1
Newbie
Thread Starter
Join Date: Nov 2012
Location: Penticton, bc, CaNaDa
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0L HO
alginment report included.. camber angle?
Did a wheel alignment today on my jeep today at work, and am confused by the camber reading of the left front tire. I did the ball joints a couple months ago, and they are still tight. This is a stock jeep , old springs, old shocks etc.
i assumed that camber angle was determined by the location of the ball joints as . am i wrong to guess that the front axle tube is bent? Anyone hear of adjustable ball joints to cure this camber?
i assumed that camber angle was determined by the location of the ball joints as . am i wrong to guess that the front axle tube is bent? Anyone hear of adjustable ball joints to cure this camber?
#2
Junior Member
Join Date: Oct 2012
Location: Tallahassee, Florida
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Those reading are the same on the same side and everything as my cherokee..... Camber wise that is. Identical number and all..... My axle is straight from wat the guy at the alignment shop reported. He is a jeep guy too.
Thread
Thread Starter
Forum
Replies
Last Post
tleed
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
10-04-2015 01:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)