Ey guys my airbag light will not go off. Ive done a guage reset and its not the clockspring becasue my horn and cruise still works. What else should i try? Also there is a wire that connects to thebottom of the drivers seat wht is that for i dont have power or heated seats

 

Could b clock spring, horn and cruise are separate circuits. Airbag wires could b broken but cruise and horn r ok. Just sayin that its possible. The wire under ur seat is for Ur seatbelt warning light I would assume.

 

So how would i go about fixing this?

 

With out knowing the code that is active in airbag control module it is a pure guessing game. Probably is clk spring. But Ur just taking a shot in the dark at it really. JMHO

 

What year is Ur xj?

 

its a 2001 how do i find out way the code is

 

Other than a shop im not sure.

 

I pm u a clockspring wiring diagram. If u are familiar with a DVOM disconnect batt and wait a bit then pull airbag off and column shroud so u can check continuity through clockspring. That way u can rule out one item at least.

 

Fuse 26 and 27 are they good?

 

the horn and cruise can still work with a bad clock spring fyi..

 

Can you send me that too, trying to fix my 99

 

Ya look for it around 7 pm central time. it is On my home computer. Im at work.

 

Ive got the clockspring from a 96 with airbag, id sell. I have a grant wheel.

the only advice I have other then that is bad, and you shouldnt do it.

but, if the surround to your gauge cluster was to just so happen come off, and the cluster pulled itself out a little, I suppose the air bag light bulb could fall out the back.