Adding the Borg Clock panel to an XJ without the harness for it
Thread Starter
Junior Member
Joined: Dec 2010
Posts: 35
Likes: 0
From: Philadelphia
Year: 1996
Model: Cherokee
Engine: 4.0L V6
Adding the Borg Clock panel to an XJ without the harness for it
I just pulled this clock panel from a 95 cherokee. Its the one from above the cigarette lighter. I cut it after the harness, of course, I have no harness of my own there. It has 5 wires, which seems like a lot for a clock to me.
2 black wires
1 red wire
1 orange/white
1 blue/white
I'd like to get this thing connected if possible, it only ran me a buck at the junk yard. Hope someone can help, I have already scoured the Jeep manual for a wiring diagram but I couldn't find one
thanks!
ps. i can post a pic if absolutely needed
2 black wires
1 red wire
1 orange/white
1 blue/white
I'd like to get this thing connected if possible, it only ran me a buck at the junk yard. Hope someone can help, I have already scoured the Jeep manual for a wiring diagram but I couldn't find one
thanks!
ps. i can post a pic if absolutely needed
CF Veteran
Joined: Feb 2011
Posts: 3,074
Likes: 0
From: Bergen County, New Jersey U.S.A.
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
The plug is there you have to take the panel out... it is usually tucked back behind the radio or the lighter... and taped down... and sure why not post a picture
Last edited by The Rooster; Feb 8, 2011 at 04:51 PM.
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
Mar 10, 2021 05:52 PM
Brandonrcm
Accessories
10
Dec 2, 2015 07:48 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)