AC Conversion Problems
07-27-2010, 10:26 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2010
Location: South Florida
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
AC Conversion Problems
I went and bought the kit to convert my 89 waggy over to 134 last night and immediately ran into problems.
Im not sure how it is on other years but in 89 the High and Low Pressure ports are located on the top of the compressor. Un fortunately the low pressure adapter that comes with the kit (and most kits from what Ive seen) is to long and when it atached I cant conect the charging equipment.
Has anyone else run into this? I think Im going to try and find a brass 90* to fit in there but I was wondering if maybe Im just slow and missing the obvious.
Thanks in advance for your help.
Im not sure how it is on other years but in 89 the High and Low Pressure ports are located on the top of the compressor. Un fortunately the low pressure adapter that comes with the kit (and most kits from what Ive seen) is to long and when it atached I cant conect the charging equipment.
Has anyone else run into this? I think Im going to try and find a brass 90* to fit in there but I was wondering if maybe Im just slow and missing the obvious.
Thanks in advance for your help.
Thread
Thread Starter
Forum
Replies
Last Post
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
10-18-2022 04:11 PM
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
Ricardo Siqueiros
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-03-2015 09:17 PM
Jeepy11
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2015 09:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)