ABS Sensor & Warning Light
10-02-2016, 02:56 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2013
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
ABS Sensor & Warning Light
The ABS warning light is coming on since i replaced the rear drums and axle shaft. How far should the sensor be apart for the tone ring, mine is about 1/4 inch? Does that seem about right?
Last edited by billyonemate; 10-02-2016 at 02:57 PM. Reason: typo
10-17-2016, 01:05 PM
#3
Junior Member
Thread Starter
Join Date: Mar 2013
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
After a lot of trial and error, it turns out it needs to be about 2mm from the tone ring - thanks everyone 
Last edited by billyonemate; 10-17-2016 at 01:07 PM. Reason: typo
Thread
Thread Starter
Forum
Replies
Last Post
BlueRidgeMark
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
12-03-2016 04:24 PM
jon71203
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-29-2016 09:07 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)