Jeep Cherokee Forum

Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

?

Thread Tools
 
Search this Thread
 
Old Feb 16, 2009 | 08:51 AM
Share
  #1  
kenny09's Avatar
kenny09
Thread Starter
Newbie
 
Joined: Feb 2009
Posts: 19
Likes: 0
Year: 1988
Model: Cherokee
Engine: 4.0
Default ?
do u think my jeeep has a bigger lift then 3in its got 33 1250 15 and clears them fine at full flex or anything
Reply
0
Old Feb 16, 2009 | 08:57 AM
Share
  #2  
blank87's Avatar
blank87
Seasoned Member
 
Joined: Oct 2008
Posts: 287
Likes: 1
From: Vail, CO
Year: 2000
Model: Cherokee
Engine: 4.0
Default
looks like its almost 4.5 inches
Reply
0
Old Feb 16, 2009 | 09:06 AM
Share
  #3  
REWSTER's Avatar
REWSTER
CF Veteran
 
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
Default
measure from center of wheel to bottom of fender stock is 17" then subtract the diff, it dosent look like your fenders are cut so that should work
Reply
0
Old Feb 16, 2009 | 09:08 AM
Share
  #4  
kenny09's Avatar
kenny09
Thread Starter
Newbie
 
Joined: Feb 2009
Posts: 19
Likes: 0
Year: 1988
Model: Cherokee
Engine: 4.0
Default
ok thank
Reply
0
Old Feb 16, 2009 | 09:17 AM
Share
  #5  
kenny09's Avatar
kenny09
Thread Starter
Newbie
 
Joined: Feb 2009
Posts: 19
Likes: 0
Year: 1988
Model: Cherokee
Engine: 4.0
Default
well i just found out my dad got me a ls1 today for it and my other lift and all should ne here friday
Reply
0
Old Feb 16, 2009 | 10:03 AM
Share
  #6  
okcjeeper's Avatar
okcjeeper
::CF Administrator::
 
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Default
Originally Posted by REWSTER
measure from center of wheel to bottom of fender stock is 17" then subtract the diff, it dosent look like your fenders are cut so that should work
Yep one is 17" and one is 17.5". Just not sure which is which between the front nad rear. Also that's only good if the fender flairs have not been relocated.
Reply
0
Old Feb 16, 2009 | 10:03 AM
Share
  #7  
okcjeeper's Avatar
okcjeeper
::CF Administrator::
 
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Default
Originally Posted by kenny09
do u think my jeeep has a bigger lift then 3in its got 33 1250 15 and clears them fine at full flex or anything
Those flairs look to be in the stock location and if so it's more then 3" if it's got 33's and it doesn't rub when driving.
Reply
0

Trending Topics

Old Feb 16, 2009 | 02:16 PM
Share
  #8  
offroadnut36's Avatar
offroadnut36
CF Veteran
 
Joined: Aug 2008
Posts: 5,603
Likes: 0
From: Hollidaysburg, PA
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
Default
did you say your dad bought you an LS1??? as in the motor thats in camaros and corvettes???? That would be WICKED!
Reply
0
Old Feb 16, 2009 | 02:52 PM
Share
  #9  
nick_n_ii's Avatar
nick_n_ii
CF Veteran
 
Joined: Mar 2008
Posts: 5,902
Likes: 19
From: Kalkaska, Michigan
Year: 2001
Model: Cherokee
Engine: 4.0L
Default
Those are 10" wide wheels(at least that's what they look like) I'd say it looks like your running closer to 6.5" lift rather than 3 or 4.5....
Reply
0
Back to Subforum
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
View Next Unread
Tranny cooler

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



Advanced Search

All times are GMT -5. The time now is 02:08 AM.