Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   '99 Cherokee Turn Signals not Working (https://www.cherokeeforum.com/f2/99-cherokee-turn-signals-not-working-75073/)

redjeep99 01-30-2011 02:25 PM

'99 Cherokee Turn Signals not Working
 
I have read posts by several other members about their turn signals not working. I wasn't able to solve my problem with that help so I ask this question. My turn signals worked somewhat for a while then after time just froze in the on position. I replaced the flasher making the turn signals good as new again. Then my friend got into a extremely minor fender bender in the jeep ( he got hit in the back bumper) and from that moment on the turn signals do not work. This is what I have done so far: I have replaced the flasher, replaced the turn signal switch, checked all the fuses, checked all the bulbs and still nothing. The lights work i.e. headlights, taillights, side markers and interior lights, just nothing when it comes to hitting that turn signal. I am at a wall and have an inspection to pass next month. Any Ideas???????????
Thanks, Matt

Frugal 01-30-2011 03:00 PM

wire connections
 
Did you check your wire harness connections in the drivers side rear quarter panel behind the spare tire?

redjeep99 01-31-2011 07:22 AM

No I didn't know there was a wiring harness back there. I am guessing you access it by taking the spare tire off then removing the panel on the inside. I will try today. Thanks

XJUSMC 01-31-2011 08:39 AM

I'm having issues with my passenger side side marker turn signal light, the one on the quarter panel not the bumper. It's the only one not working.

wonder if the rear driver side panel will help me too.

I've changed the bulb and the fuse.

redjeep99 02-01-2011 08:24 AM

Well no luck on the harness, I don't see any corrosion or anything and they are secure. So I am back to square one. :brickwall:

LT6916 02-01-2011 10:37 AM

Jiggle the hazard switch?

fishunterx 02-01-2011 10:46 AM


Originally Posted by LT6916 (Post 840154)
Jiggle the hazard switch?

Beat me to it, I messed with mine the other day, and then my blinkers went out, messed with it again to get them working again, now as far as I'm concerned, I HAVE NO HAZZARD LIGHTS, lol.

redjeep99 02-15-2011 01:09 PM

well i ended up giving in. I had to take the Jeep to someone because i couldn't figure the dang thing out. My mechanic said there was a wire shorting out and kept causing the fuse to blow. But i never saw any fuses blown. Anyways he fixed the problem and now my Jeep passes inspection it only cost me $52.00. Not to bad. Thanks for all your help!


All times are GMT -5. The time now is 05:37 AM.


© 2024 MH Sub I, LLC dba Internet Brands