ok so ive come up with a budget of about $1800 for the whole rebuild. picked up engine for $300.

so far ive ordered Cloyes original True Roller Timing Set, Crower camshaft Adv. Duration 280/280, Lift .448/.448, crower camsaver hydraulic lifters, high perfomance oil pump, fel pro gaskets all around, speed pro Hypereutectic pistons and rings, performance distributors ignition kit, bearings for cam, rod and crank and harland sharp roller rockers.

curious if have all i need and if not what im missing.. and which fuel injectors to get. i kno there are better injectors that will fit the 4.0 L6 but haven't a clue which ones they are.....

any and all help would be greatly appreciated. its my first rebuild so kinda learnin as i go...

 

3 angle valve job, port match the head, have the spring pressure checked, new valve stem seals, mil for flatness within .002" as required. Budget $200-$300.