'94 Cherokee heater blower
#1
Senior Member
Thread Starter
Join Date: Sep 2014
Location: Saginaw Mi area
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
'94 Cherokee heater blower
I've been all over the 'net looking for a connector with a wiring pigtail, for the heater blower switch on my Cherokee.
The connector and the switch had been over-heated before I bought the Jeep, and the connector is half melted away.
I have a new switch and resistor coming, but the connector is elusive to locate !
Any leads as to where to get one ??
BILL
The connector and the switch had been over-heated before I bought the Jeep, and the connector is half melted away.
I have a new switch and resistor coming, but the connector is elusive to locate !
Any leads as to where to get one ??
BILL
#3
Senior Member
Thread Starter
Join Date: Sep 2014
Location: Saginaw Mi area
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
I decided, after looking all over for a connector, to use yellow spade lugs in place of the connector, since I have all the lugs & tooling to do it that way.
Also bought a new blower motor, figuring it as the cause of all the problems, from drawing too much current...
And while waiting for those parts, I did the rear brakes, with everything new except the backing plates.....
Also bought a new blower motor, figuring it as the cause of all the problems, from drawing too much current...
And while waiting for those parts, I did the rear brakes, with everything new except the backing plates.....
#5
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
I decided, after looking all over for a connector, to use yellow spade lugs in place of the connector, since I have all the lugs & tooling to do it that way.
Also bought a new blower motor, figuring it as the cause of all the problems, from drawing too much current...
And while waiting for those parts, I did the rear brakes, with everything new except the backing plates.....
Also bought a new blower motor, figuring it as the cause of all the problems, from drawing too much current...
And while waiting for those parts, I did the rear brakes, with everything new except the backing plates.....
Thread
Thread Starter
Forum
Replies
Last Post
seansr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
11-15-2022 06:08 AM
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
08-30-2015 03:17 PM
Brynjaminjones
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-22-2015 05:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)