I have a 1993 Cherokee sport and have had some issues with my clutch/slave cylinder and was hoping someone might have a possible solution for me or some advice. The problem started a couple years ago and i have had it "fixed" by a shop a few times but the problem keeps coming back. The problem is the bite point on my clutch will slowly drop lower until its almost at the floor, i have replaced the clutch master cylinder and had the jeep in to the shop and they told me it was an issue with the slave cylinder. unfortunately with my jeep the slave cylinder is located inside the transmission making it a ***** to work on. so I was just wondering if anyone has had the same issue and has a solution or if anyone has swapped the slave cylinder to the outside of the transmission? or would it be better to do a full transmission swap? anyways thanks for checking out my post any help would be appreciated.