Does the front bump stop on a 87 xj just screw off? I have to remove it to get the 2" spacer on the front but the sucker will not budge. almost feels welded. Cant get a breaker bar on it of course. How did you remove yours on your 80's early 90's xj?
CF Veteran
Some of them are welded on the XJ... no rhyme or reason I can find, just some are, some aren't
I wanted to use Wrangler jounce bumps and cups, since they are a little larger, so I cut the existing cups below the weld and tapped the existing hole, and can screw in the larger cups for the larger jounce bumps
I wanted to use Wrangler jounce bumps and cups, since they are a little larger, so I cut the existing cups below the weld and tapped the existing hole, and can screw in the larger cups for the larger jounce bumps
Take the rubber bumpstop out & you will see the head of a bolt up in the cup. 14 mm, I think.
I changed mine out to accommodate a bigger diameter rubber bumpstop.
I changed mine out to accommodate a bigger diameter rubber bumpstop.