4x4 shift lever
Thread Starter
Newbie
Joined: Nov 2011
Posts: 5
Likes: 0
From: greenville sc
Year: 1984
Model: Cherokee
Engine: 4.0
the 4x4 shift lever is stuck.i have a 1984 cherokee with selec-trac...any ideas as to what could cause this..it runs and drives fine in two wheel high..the lever just wont budge.
CF Veteran
Joined: Sep 2010
Posts: 1,562
Likes: 3
From: Spanaway
Year: 97
Model: Cherokee (XJ)
Engine: 4.0
X2 on neutral and the transmission has to be in neutral to shift back into 2wd also. As far as I know all/most jeeps are shift on the fly tcases which means you can be rolling (0 to 3MPH) and put the transmisson in N throw the tcase into 4wd and put the trans back into D and keep going. If it growls at you your going to fast
::CF Moderator::
Joined: Aug 2011
Posts: 43,971
Likes: 1,578
From: Prescott, Az
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
X2 on neutral and the transmission has to be in neutral to shift back into 2wd also. As far as I know all/most jeeps are shift on the fly tcases which means you can be rolling (0 to 3MPH) and put the transmisson in N throw the tcase into 4wd and put the trans back into D and keep going. If it growls at you your going to fast 

Let off the gas, move lever, tap the gas and let off at any speed in a straight line. Same for either 2 to 4 or 4 to 2, except obviously 4 low which requires engaging 4 high, stopping, putting the clutch in or auto trans into N and then shifting into 4 low.
Thread
Thread Starter
Forum
Replies
Last Post
Programbo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
May 23, 2024 07:20 AM
cr1d3r
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 29, 2020 12:15 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
TheDesertlights
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 4, 2016 10:13 AM
Vegas101
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
Sep 4, 2015 11:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



