4WD linkage
#1
Member
Thread Starter
Join Date: Jan 2010
Location: Enterprise, AL
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0I6
4WD linkage
my four wheel linkage rod bent in half resulting in either 2WD or 4Low only.
has anyone else had to find one of these? its the small rod that just pops out at either end with an adjustment on it. i had gotten one from a 89 at a junkyard but it has different bends in it and the adjustment was seized on it. is there anywhere i can find a NEW one?
has anyone else had to find one of these? its the small rod that just pops out at either end with an adjustment on it. i had gotten one from a 89 at a junkyard but it has different bends in it and the adjustment was seized on it. is there anywhere i can find a NEW one?
Last edited by ceejay612; 03-07-2010 at 05:24 PM.
#4
Member
Thread Starter
Join Date: Jan 2010
Location: Enterprise, AL
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0I6
its bent because it has been eaten away by the rust cancer that is caused by NY winters in which someone feels that a 2:1 inches of salt to inches of snow ratio is the best course of action on the road.
#5
CF Veteran
AHHHHH!! thats why. Yea I stay away from NY in the winter because of that. But then again CT over salts everything to. I have a rod from a 94 but IDK if its the same as a 2000.
Thread
Thread Starter
Forum
Replies
Last Post
cmcl3m0r3
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
05-21-2019 02:38 PM
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
10-04-2015 06:34 AM
sjm79902
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-30-2015 11:14 PM
shadowmoses
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-30-2015 06:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)