4 lo ?
#1
Newbie
Thread Starter
Join Date: Mar 2010
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
4 lo ?
i have a 99 jeep cherokee sport and the other day i got it stuck in the driveway four hi and full time both worked but when i put it in four lo it didnt engage and it made a really fast clicking sound any ideas?
#2
Seasoned Member
Join Date: Apr 2009
Location: fresno, ca.
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 liter h.o.
put it in four low with the vehicle off and climb under the jeep. your linkage may need a lil adjusting. when mine was doing this the linkage was actually bent and hitting a bolt, so it couldnt completely engage. i hope this helps
#3
Seasoned Member
Join Date: Feb 2010
Location: Co
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: I6
make sure to put it into neutral then try shifting it in. I'm not sure but it might be linkage or gears in t-case not wanting to interlock
#4
Junior Member
Join Date: Nov 2009
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 I6
I also need a little help. When i put mine in 4high or low I hear a clicking noise maybe every revolution of the tire. It goes away when Im at about 20mph but then I still feel a vibration. Also a bit of grinding when I turn the wheel at a slow speed. Im thinking front u joints but I would just like some knowledge on it before i start that.thanx j. 95 sport