4.10 or 4.56
Thread Starter
Seasoned Member
Joined: Jul 2009
Posts: 398
Likes: 0
From: Bremerton
Year: 87
Model: Cherokee
Engine: 4.0
4.10 or 4.56
So Im looking to do lower gears and a locker. I still have 31s and it is a dd but will probably go with bigger tires once I get more lift. Is 4.56 to low for highway speeds or should I go with the 4.10s. Is there anything else I need when doing gears other then the gears?
Member
Joined: Dec 2009
Posts: 220
Likes: 0
From: Central MA
Year: 1997
Model: Cherokee
Engine: 4.0I6
make sure you re gear both axles, im in the process of getting 4.10s for my 89, just ran into pinion issues in the front so this just gives me a better reason, ive been told 4.10s are good for the 31-35 range of tires and a decent ride on the highway
CF Veteran
Joined: Jan 2010
Posts: 2,059
Likes: 1
From: Indianola IOWA
Year: 1992
Model: Cherokee
Engine: 4.0
This post is from YESTERDAY and has a link to a chart in it.
https://www.cherokeeforum.com/f2/gears-35888/
https://www.cherokeeforum.com/f2/gears-35888/
CF Veteran
Joined: Aug 2008
Posts: 5,603
Likes: 0
From: Hollidaysburg, PA
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
4.10s for 31s 4.56s for 33s, and 4.88s for 35s thats if you have an auto.
if you have a manual, id go 3.73 for 31s 4.10s for 33s and 4.56s for 35s
if you have a manual, id go 3.73 for 31s 4.10s for 33s and 4.56s for 35s
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthCent]: 4.56 gear set and master install kits D30 and D44
dcollins3208
Axles/Tires/Wheels
12
Dec 11, 2015 11:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)